It’s all in the Details

MODEL D12s Subwoofer: Small footprint, big sound. Benefiting from many of the technologies of our flagship subs, these sealed subs generate amazing performance in the smallest footprint. Low Q, shallow rolloff response geared for sound quality and smoothly integrating into the listening room. Also, a great choice for using multiple subs to optimize in room response and smooth out seat-to-seat variation.
\
The smallest subwoofer in the series, yet packs enough punch to be certified THX Dominus using a pair of D12s subs. Powered by our 1.5kW amplifier, all functions and safeties are controlled by a 48-bit data bath DSP and 32-bit ARM M4 Cortex processor, able to react in microseconds, powerful enough to slam. Ground up drivers developed by our team of engineers.

Carbon fiber composite diaphragms, multiple aluminum shorting rings, massive magnets, multi-layer Nomex spiders and lightweight aluminum voice coil wire are the key ingredients – Proprietary nonlinear modeling techniques allow us to simulate all these components and then optimize for real world driver performance – free air and in box. Further refinement is done with the aid of Klippel laser measurements to dial things in. All D-Series subs share our 2.4” LCD touchscreen display and ability to control advance settings using our App.

MODEL D12s Subwoofer benefits from many of the technologies of Perlisten Audio's flagship subs, this sealed sub generates amazing performance in the smallest footprint.

- Massive bass, minute distortion levels
- 32-bit ARM M4 Cortex processor
- Carbon fiber composite diaphragms
- 2.4" LCD touchscreen display
- App Control
- Small Footprint, Big Sound

Low Q, shallow rolloff response geared for sound quality and smoothly integrating into the listening room. Also, a great choice for using multiple subs to optimize in room response and smooth out seat-to-seat variation.

The D12s is the smallest subwoofer in the series, yet packs enough punch to be certified THX Dominus using a pair of D12s subs. Powered by Perlisten's 1.5kW amplifier, all functions and safeties are controlled by a 48-bit data bath DSP and 32-bit ARM M4 Cortex processor, able to react in microseconds, powerful enough to slam. Ground up drivers developed by Perlisten Audio engineers. Carbon fiber composite diaphragms, multiple aluminum shorting rings, massive magnets, multi-layer Nomex spiders and lightweight aluminum voice coil wire are the key ingredients – Proprietary nonlinear modeling techniques allow us to simulate all these components and then optimize for real world driver performance – free air and in box. Further refinement is done with the aid of Klippel laser measurements to dial things in. All D-Series subs share our 2.4" LCD touchscreen display and ability to control advance settings using our App.

1.5 - 3.0 KW OF INTELLIGENCE
At the core of our amps is a 32-bit ARM processor to control innovative technologies like real-time temperature status, current and voltage monitoring, fault detection, and performance diagnostics executed more than 1,000 times per second. All of this to make sure that our 3 kW amplifiers are always in control, even well below 20 Hz. In addition, we have dual balanced and single-ended inputs with passthrough, 12v trigger, and OTA firmware updates via our app to always deliver the latest improvements. The end result is low distortion bass for the finest details with the dynamic range to meet the highest transients without compression and control at the click of a button.

APP CONTROL
Bass management is critical to the control the notoriously difficult acoustic environment known as your listening room. Standing waves, subwoofers placed in a less than ideal position, and sound variation from seat to seat are only some of these issues. Control for up to eight subwoofers with three banks of 10 PEQ’s per woofer, Time Delay, Phase, up to six standard EQ’s, 24 dB lowpass crossovers and polarity switching, are all tools available to optimize in-room performance. Our app uses Bluetooth Low Energy to communicate with your iOS or Android based devices.

Alignment: Acoustic suspension
Amplifer: 1.5kW rms short term
Display Interface: 2.4" LCD color touchscreen
App: iOS and Android
Processor: 32-bit ARM Cortex M4, double precision floating point math
DSP Engine: Ti DSP 48-bit data paths
Driver compliment:
- 300mm, Carbon fiber diaphragm
- +/-30mm linear excursion
Reference sensitivity: 92dB / 150mV/ 1.0m
Frequency Response:
THX EQ: 20-289Hz (-6dB) / 16-330Hz (-10dB)
Boost (Large Room) EQ: 16-289Hz (-6dB) / 14-330Hz (-10dB)
Cut (Small Room) EQ: 25-289Hz (-6dB) / 19-330Hz (-10dB)
Inputs:
- (2) Balanced XLR
- (2) Unbalanced RCA
Outputs:
- (2) Balanced XLR unbuffered
- (2) Unbalanced RCA unbuffered
Parametric EQ:10-Band PEQ with 3 user presets
Low Pass filter: Bypass, 30-160Hz, slope 6,12,18,24dB/oct
Phase: Variable 0-270°
Polarity: Normal / inverted
Configurable Auto turn-on and 12v Trigger: XLR 1, XLR 1+2, RCA 1, RCA 1+2
Dimensions (HxWxD):
- 448 x 420 x 450mm
- 17.6 x 16.5 x 17.7"
Weight: 41.0 kg (101.2 lbs.)
Certification: THX Dominus

Orders ship Sunday through Friday from our offices in Dubai, UAE.

In-stock products typically ship within 48 hours and should be expected to arrive in 3-4 business days. Orders outside of the UAE should be expected to arrive in 5-7 business days.

Pre-order and backorder products will state the approximate delivery timeline beside the Add To Cart button.

If you would like to place a custom order, chat with our specialists for a guided shopping experience. Once your order has been placed, a timeline will be provided depending on your order details.

- Free delivery within the UAE
- Shipping charges will be calculated upon checkout for orders outside of the UAE (Bahrain, Oman, Kuwait, Saudi Arabia & Qatar).
- Taxes and duties are calculated according to the applicable laws of the state or country an item is shipped to and are the customer's responsibility.

For additional information on shipping and our exchange & return policy visit our help center.

Installation charges are applicable and can be paid upon delivery for our clients based in Dubai.

- Installation Charges: AED 450 Per Hour
- Speaker Cables: AED 32 Per Meter
- Trunking: AED 10 Per Meter

For clients based outside of the UAE, please contact our specialists and we will share an estimate based on your requirements.