The Perlisten D215s Subwoofer is an uncompromising, reference-grade active subwoofer from Perlisten Audio’s D-Series. It employs dual 15-inch Textreme TPCD drivers in an opposed, force-canceling configuration within a sealed enclosure, ensuring incredibly tight, accurate, and powerful bass reproduction without resonance.

Driving these advanced drivers is a massive 3.2kW (3200 Watts) RMS Class-D amplifier, providing limitless headroom for dynamic impact and extending bass down to a staggering 13 Hz (-6dB THX EQ) or even 10 Hz (-10dB Boost EQ). A sophisticated DSP engine, accessible via a 2.4-inch touchscreen and a comprehensive smartphone app, allows for precise control, including a 10-band parametric EQ to perfectly integrate with any room.

The D215s holds the prestigious THX Dominus certification, signifying its capability for reference-level output in the largest home theater environments. With its immense power, extreme linearity, and meticulous engineering, the Perlisten D215s stands as a pinnacle of subwoofer performance, designed for the most demanding audiophiles and home theater enthusiasts.

The Subwoofer That Will Surprise You With Its Accuracy!

MODEL D215s Subwoofer is the audiophile’s choice, where sound quality and Transients free of overhang are paramount. There is simply no better expression of bass performance than Perlisten Audio's push-pull subs. Ground up drivers developed by the Perlisten team of engineers, Carbon fiber composite diaphragms, multiple aluminum shorting rings, massive magnets, multi-layer Nomex spiders and lightweight aluminum voice coil wire are the key ingredients.

Proprietary nonlinear modeling techniques allowed Perlisten to simulate all these components and then optimize for real world driver performance – free air and in box. Further refinement is done with the aid of Klippel laser measurements to dial things in. To take performance to another level, the push-pull drivers reduce even order harmonics distortion by an additional 10-12dB. Powered by the 3.0kW amplifier, all functions and safeties are controlled by a 48-bit data bath DSP and 32-bit ARM M4 Cortex processor, able to react in microseconds, powerful enough to slam. All D-Series subs share Perlisten's 2.4" LCD touchscreen display and ability to control advance settings using their App. Certified by THX Dominus, The D-Series subs are the world’s first. A testament to the level of design and performance achieved.

The Next Step
Though we can compete with the world’s best in that category, our design metric is to have ultra-low distortion to recreate the subtlety of every detail from the bass guitar to the 12 Hz stomp of a T-Rex. Innovative technology such as a 3 kW smart amp with a 32 bit ARM core, iOS and Android app to control up to eight subwoofers, a 2.4” TFT touchscreen, and a dual woofer Push-Pull configuration for extremely low distortion. This monster can dance as effortlessly as a ballerina or crush the frequencies well below 20Hz.

The Mark of a Push-Pull Design
Starting with the tuning of the massive 60 mm peak linear excursion, spider compliance, and magnetic motor curve. The two woofers are then mounted on a massive 80 mm front baffle and operated in push-pull configuration with cancellation of second order harmonics to further reduce distortion every step of the way ensuring the best low frequency experience possible.

1.5 - 3.0 KW OF INTELLIGENCE
At the core of our amps is a 32-bit ARM processor to control innovative technologies like real-time temperature status, current and voltage monitoring, fault detection, and performance diagnostics executed more than 1,000 times per second. All of this to make sure that our 3 kW amplifiers are always in control, even well below 20 Hz. In addition, we have dual balanced and single-ended inputs with passthrough, 12v trigger, and OTA firmware updates via our app to always deliver the latest improvements. The end result is low distortion bass for the finest details with the dynamic range to meet the highest transients without compression and control at the click of a button.

Alignment: Push-Pull, acoustic suspension
Amplifer: 3.0kW rms short term
Display Interface: 2.4" LCD color touchscreen
App: iOS and Android
Processor: 32-bit Arm Cortex M4, double precision floating point math
DSP Engine: Ti DSP 48-bit data paths
Driver compliment:
- ((2)380mm, Carbon fiber diaphragm
- +/-30mm linear excursion
Reference sensitivity: 92dB / 150mV/ 1.0m
Frequency Response:20-200Hz (-6dB) / 16-210Hz (-10dB)
THX EQ:15-200Hz (-6dB) / 13-210Hz (-10dB)
Boost (Large Room) EQ: 20-231Hz (-6dB) / 16-245Hz (-10dB)
Cut (Small Room) EQ:24-200Hz (-6dB) / 18-210Hz (-10dB)
Inputs:
- (2) Balanced XLR
- (2) Unbalanced RCA
Outputs:
- (2) Balanced XLR unbuffered
- (2) Unbalanced RCA unbuffered
Parametric EQ: 10-Band PEQ with 3 user presets
Low Pass filter: Bypass, 30-160Hz, slope 6,12,18,24dB/oct
Phase: Variable 0-270°
Polarity: Normal / inverted
Configurable Auto turn-on and 12v Trigger: XLR 1, XLR 1+2, RCA 1, RCA 1+2
Dimensions (HxWxD):
- 805 x 500 x 650.5mm
- 31.7 x 19.7 x 25.6"
Weight: 92.0 kg (202.4 lbs.)
Certification: THX Dominus
Available finishes: Piano black

Orders ship Sunday through Friday from our offices in Dubai, UAE.

In-stock products typically ship within 48 hours and should be expected to arrive in 3-4 business days. Orders outside of the UAE should be expected to arrive in 5-7 business days.

Pre-order and backorder products will state the approximate delivery timeline beside the Add To Cart button.

If you would like to place a custom order, chat with our specialists for a guided shopping experience. Once your order has been placed, a timeline will be provided depending on your order details.

- Free delivery within the UAE
- Shipping charges will be calculated upon checkout for orders outside of the UAE (Bahrain, Oman, Kuwait, Saudi Arabia & Qatar).
- Taxes and duties are calculated according to the applicable laws of the state or country an item is shipped to and are the customer's responsibility.

For additional information on shipping and our exchange & return policy visit our help center.

Installation charges are applicable and can be paid upon delivery for our clients based in Dubai.

- Installation Charges: AED 450 Per Hour
- Speaker Cables: AED 32 Per Meter
- Trunking: AED 10 Per Meter

For clients based outside of the UAE, please contact our specialists and we will share an estimate based on your requirements.