The Fyne Audio F502SP is a “Special Production” floorstanding loudspeaker that significantly elevates the acclaimed F502, integrating high-end engineering from Fyne’s flagship F700 series. It features a premium 200mm IsoFlare™ point source driver—combining a multi-fibre bass/midrange cone with a 25mm magnesium dome compression tweeter—for outstanding stereo imaging and consistent off-axis response. An additional 200mm bass driver ensures deep, articulate low frequencies.

The F502SP benefits from an advanced BassTrax™ Tractrix Diffuser System on an aluminium sandwich plinth, providing seamless bass integration into any room. Its upgraded crossover, derived from the F700 series, is Cryo-Lite treated and uses high-grade components for an exceptionally clean signal path.

Housed in a more rigidly braced, damped cabinet, the speaker is finished in luxurious high-gloss black, white, or piano gloss walnut. Delivering a bold, authoritative sound with impressive scale, dynamic range, and clarity, the Fyne Audio F502SP is a compelling choice for discerning audiophiles seeking flagship performance and elegant design.

At the heart of all SP Series loudspeakers is the award-winning F500 Series cabinets, enhanced with subtle improvements to further refine performance. SP models use a higher density fibreboard to increase rigidity, plus a balanced combination of bonded acoustic fiber and polyether foam damping to control resonances. The parallel-sided heavyweight construction is internally braced to further lower coloration. The concept extends to the driver/cabinet interface, the rear of each drive unit being coupled to the bracing spars with an energy-absorbing damping mastic.

BASSTRAXTM PORT SYSTEM
All three SP models incorporate Fyne’s flagship BassTrax Tractrix bass porting system as found in a larger format on the F700 and flagship F1 models. The system integrates a tuned downward-firing port and Tractrix profile cone that converts plain wave port energy into a spherical 360-degree wavefront that exits uniformly through the plinth. The system smooths LF output by evenly dispersing energy into the room, making the speaker much less critical of room positioning.

CROSSOVER
With many crossover components and circuit architecture trickled down from the premium F700 loudspeakers, F500 SP models bring a new level of refinement and detail to the already successful F500 design. Low-loss laminated core inductors, high-grade polypropylene capacitors, and Van Den Hul Matched Crystal silver-plated OFC wiring ensure transparent signal transmission, with final crossover and component tuning undertaken by Dr. Paul Mills. The F500 SP Series integrate Fyne’s high-quality bi-wire terminal panel with a fifth loudspeaker terminal for driver chassis grounding.

PLINTH
Optimizing floor coupling and better dissipating vibration in the F500 Series cabinets, floorstanding SP models use Fyne’s striking twin-layer metal plinth. Machined from thick aluminum plates, the two sections are precisely separated by aluminum spacers for optimum integration with the BassTrax porting system. The integrated floor spikes are adjusted from the top of the plinth to make leveling easy, while knurled lock nuts clamp the spikes firmly in position. Machined aluminum cups are provided to protect wooden floors.

System Type:2 ½ way, downwards firing port, with BassTraxTM Tractrix diffuser*, twin cavity loading system
Recommended amplifier power (Watt RMS):30- 200
Continuous power handling (Watt RMS):100
Sensitivity (2.83 Volt @ 1m):92dB
Nominal impedance:8 Ohm
Frequency response (-6dB typical in room):30Hz - 34kHz
Drive unit complement:
1 x 200mm IsoFlare point source driver, multi-fibre bass/ midrange cone, FyneFluteTM surround with 25mm magnesium dome compression tweeter, neodymium magnet system. 1 x 200mm multi-fibre bass cone, FyneFluteTM surround.
Crossover frequency:250Hz & 1.7kHz
Crossover type:Bi-wired passive low loss, 2nd order low pass, 1st order high pass
Dimensions - HxWxD:1111 x 338 x 380mm (43.7 x 13.3 x 15.0”)
Weight - Each: 30.4kg (67.0lb)

Orders ship Sunday through Friday from our offices in Dubai, UAE.

In-stock products typically ship within 48 hours and should be expected to arrive in 3-4 business days. Orders outside of the UAE should be expected to arrive in 5-7 business days.

Pre-order and backorder products will state the approximate delivery timeline beside the Add To Cart button.

If you would like to place a custom order, chat with our specialists for a guided shopping experience. Once your order has been placed, a timeline will be provided depending on your order details.

- Free delivery within the UAE
- Shipping charges will be calculated upon checkout for orders outside of the UAE (Bahrain, Oman, Kuwait, Saudi Arabia & Qatar).
- Taxes and duties are calculated according to the applicable laws of the state or country an item is shipped to and are the customer's responsibility.

For additional information on shipping and our exchange & return policy visit our help center.

Installation charges are applicable and can be paid upon delivery for our clients based in Dubai.

- Installation Charges: AED 450 Per Hour
- Speaker Cables: AED 32 Per Meter
- Trunking: AED 10 Per Meter

For clients based outside of the UAE, please contact our specialists and we will share an estimate based on your requirements.