AED 29,675.00 (Inc. Tax)
AE
SA 
OM
KW
BH
QA1 in stock
7-Channel Solid State Amplifier
- 200 Watts x 7 Channels
- Designed for home theaters
- LED power output indicators
Overview
MC8207 ELECTRONIC SPECIFICATIONS
Power Output per Channel:200W @ 4 or 8 Ohms
Number of Channels:
– 7 (can also be used as a 2-zone amplifier with 5 channels in zone A and 2 channels in zone B)
Total Harmonic Distortion:0.005%
S/N below rated output:112dB
Dynamic Headroom:1.7dB
Damping Factor:>140
Rated Power Band:20Hz to 20kHz
Frequency Response:
+0, -0.25dB from 20Hz to 20,000Hz
+0, -3dB from 10Hz to 100,000Hz
CONTROL
Remote Power Control: Yes, 7 or 5 + 2 Channel
Multi-Channel DB25 Cable: N/A
GENERAL SPECIFICATIONS
Circuit Configuration: Push-Pull Complementary
Circuit Design: Solid State
Mono Bridge: No
Mono Parallel: No
Output Type:
– Direct Coupled with Dynamic Power Manager®
Meters: Yes, new style LED
Meter Light Switch: No
Balanced Input: Yes
Front Panel: Glass
Illumination: LED Fiber Optic
Chassis Style: Inverted
CONNECTIVITY
Speaker Binding Post Type: Yes
WEIGHTS & DIMENSIONS
Unit Dimensions (W x H x D):
– 17-1/2″ (44.5cm) x 9-7/16″ (23.9cm) (including feet) x 21″ (53.3cm) (including front panel and cables)
Unit Weight: 83 lbs (37.6 kg)
Shipping Weight: 116 lbs (52.6 kg)
- At the heart of the MPC1500 is a large toroidal isolation transformer that has been specially wound to act as a low pass filter to remove unwanted noise from the AC line.
- Also employs a quick-acting surge suppression module that harmlessly releases excess voltage to the circuit’s neutral wire rather than the ground wire, where it could still find its way to your audio components and cause damage.
- Unlike surge protection devices that use other suppression methods or “power conditioners,” the MPC1500’s suppression module is not sacrificial and will not need replacing after a surge event.
- Our blue Watt meters have been repurposed to show the real time incoming voltage and the actual current draw of the connected devices. (The meters will be scaled to the correct amperage and voltage based on the local country.)
- Available with either Type B1 (a.k.a. NEMA 5-15R) or Type F1 (a.k.a. CEE 7/3 or “Schuko”) receptacles.
- Load Regulation: ± 2.5 %
- Output Voltage:
- With Type B (a.k.a. NEMA 5-15R) receptacles:
120 Volts AC Nominal (100 Volts AC Nominal for Japan only)
- With Type F (a.k.a. CEE 7/3 or “Schuko”) receptacles:
230 Volts AC Nominal
- Power Requirement:
- With Type B (a.k.a. NEMA 5-15R) receptacles:
120 Volts ~60Hz (100 Volts ~50/60Hz for Japan only)
12.0 Amps (max)
1440 Watts (max) (1200 Watts (max) for Japan only)
- With Type F (a.k.a. CEE 7/3 or “Schuko”) receptacles:
230 Volts ~50/60Hz
6.0 Amps (max)
1380 Watts (max)
GENERAL SPECIFICATIONS:
AC Power Line Protection:Specially wound toroidal isolation transformer.
Surge Suppression Type: Quick-acting surge suppression module
Number of Receptacles:
- With Type B (a.k.a. NEMA 5-15R) receptacles:
6 medical grade duplex receptacles
- With Type F (a.k.a. CEE 7/3 or “Schuko”) receptacles:
6 high quality single receptacles
Number of Always ON Receptacles: 2
Meter Light Switch: Yes
Unit Dimensions (W x H x D):17-1/2" (44.45cm) x 7-5/8" (19.37cm) (including feet) x 22" (55.88cm) (including front panel, knobs and cables)
Unit Weight:87 lbs (39.46 kg)
Shipping Weight: 105 lbs (47.63 kg)
Orders ship Sunday through Friday from our offices in Dubai, UAE.
In-stock products typically ship within 48 hours and should be expected to arrive in 3-4 business days. Orders outside of the UAE should be expected to arrive in 5-7 business days.
Pre-order and backorder products will state the approximate delivery timeline beside the Add To Cart button.
If you would like to place a custom order, chat with our specialists for a guided shopping experience. Once your order has been placed, a timeline will be provided depending on your order details.
- Free delivery within the UAE
- Shipping charges will be calculated upon checkout for orders outside of the UAE (Bahrain, Oman, Kuwait, Saudi Arabia & Qatar).
- Taxes and duties are calculated according to the applicable laws of the state or country an item is shipped to and are the customer's responsibility.
For additional information on shipping and our exchange & return policy visit our help center.
Installation charges are applicable and can be paid upon delivery for our clients based in Dubai.
- Installation Charges: AED 450 Per Hour
- Speaker Cables: AED 32 Per Meter
- Trunking: AED 10 Per Meter
For clients based outside of the UAE, please contact our specialists and we will share an estimate based on your requirements.
The McIntosh audio system is a stereo system that uses two speakers or a multi-channel system using 3 to 12 speakers. Components are the individual units that individually will offer the highest performance and fidelity possible.
Connecting the various components into a complete system of source components, control center, amplifiers, and speakers will deliver the best possible sound.
Preamplifiers are Control Centers that switch source units, turn volume up and down, and in some cases allow tone shaping or turning bass and treble sounds up or down.
Amplifiers are the ‘Muscle’ of the audio system and amplify the small audio signal from the preamp to a large one that will operate speakers and determine how dynamic the reproduced sound of the system is in one unit.
Integrated amplifiers are single chassis models that combine the function of the preamplifier and power amplifier in one unit.
Precision McIntosh power meters allow the monitoring of sound level balance and output level between the two stereo, or many multi-channel speaker channels. Meters protect valuable speaker systems from damage as long as more watts than the speakers are designed to handle are not exceeded.
The McIntosh Output Autoformer is a special transformer that is designed and manufactured in-house by McIntosh. This allows any speaker type to be used with a McIntosh amplifier and have all of the power that the amp is designed to deliver.
All other amplifier designs will not have even power with differing speaker designs. McIntosh amplifiers with the output Autoformer™ will deliver ‘All the Power You Pay For’ regardless of speaker type chosen.
Quad Differential is the most sophisticated McIntosh amplifier design that allows the impossible combination of the most powerful amplifiers with the very lowest distortion and background noise. Many would say this is the impossible combination; highest power with lowest noise but Quad Balanced make the impossible possible.
Electromagnetic switching is used in McIntosh preamplifiers and integrated amplifiers to switch the variety of source components connected. Rather than the common mechanical switches that will deteriorate with wear, electromagnetic switches are high tech switching nodes that allow very long, trouble free operation.
Performance between vacuum tube and solid state (or transistor) gear is almost identical in technical specifications. Many users request vacuum tube units that offer a slightly classical "tube" or "warm" sound to the audio presentation.
Tube and solid state models may be mixed and will all work together in a McIntosh component stereo system. Many now use downloaded music as their main media source. Sound quality will always depend on the quality of the download files and the music system interface. McIntosh offers the most advanced computer USB interface in most of our preamplifiers and integrated amplifiers which will maximize audio performance.
