The MEN220 delivers a potent suite of Room Correction, Custom-EQ and 2-Way Crossover capabilities in one easy-to-use stereo component. While any single feature of the MEN220 has the power to optimize the sonic characteristics of the highest quality audio systems, combining all the features can reveal a level of clarity and resolution unattainable by any other means.

“I have never heard my speakers sound so wonderful!” – Michael (McIntosh customer review)

The new MEN220 Room Correction System by McIntosh delivers a potent suite of Room Correction, Custom-EQ and 2-Way Crossover capabilities in one easy-to-use stereo component. While any single feature of the MEN220 has the power to optimize the sonic characteristics of the highest quality audio systems, combining the features can reveal a level of clarity and resolution unattainable by any other means. Styled in the rich tradition of McIntosh audio components the MEN220 features our trademark Fiber-Optic Illuminated Black Glass Front panel and aluminum casework. Front panel buttons and control knobs bring a familiar, easy-to-use analog interface to this digital product just as a 2-line vacuum fluorescent display reports status and aids in the set-up of the MEN220. Full system control and PC link are provided via RS232 while McIntosh Data, Power Control andIR inputs offer additional remote control flexibility. Both single-ended and balanced connections are supported; a hand-held, IR remote control is included.

- Built-In EQ
- Create custom curves w/PC Interface
- 2-way Electronic Crossover for Bi-amp
- Integrate Mono or Stereo Subwoofer
- Preserves tonality of a loudspeaker while eliminating room-interaction
- Greatly enhances the quality of imaging width and depth
- IR Remote Control
- RS-232

AUDIO SPECIFICATIONS
Unless otherwise noted, the below MEN220 Specifications were taken with RoomPerfectTM set to Bypass Mode and Voicing Mode set to Neutral.
Frequency Response: +0, -0.5dB from 20Hz to 20,000Hz
Total Harmonic Distortion:0.002% from 20Hz to 20,000Hz
Maximum Input Signal:
- 4.5V Unbalanced and Balanced (Low Sensitivity)
- 2.25V Unbalanced and Balanced (High Sensitivity)
Maximum Volatge Output:
- 4.5V Unbalanced and Balanced (Low Sensitivity)
- 2.25V Unbalanced and Balanced(High Sensitivity)
Signal to Noise Ratio:(A-WEIGHTED) 100dB
Input Impedance:10K ohms Unbalanced and Balanced
Maximum Input Signal:4.5 Unbalanced and Balanced
Voltage Gain:0dB
Output Impedance:50 ohms

GENERAL SPECIFICATIONS
Power Requirements:
- 100V ~ 50/60Hz at 35 watts
- 110V ~ 50/60Hz at 35 watts
- 120V ~ 50/60Hz at 35 watts
- 220V ~ 50/60Hz at 35 watts
- 230V ~ 50/60Hz at 35 watts
- 240V ~ 50/60Hz at 35 watts
- Standby, less than 1 watt
- Note: Refer to the rear panel of the MEN220 for the correct voltage.

OVERALL DIMENSIONS:
Width: 17-1/2 inches (44.45cm)
Height: 6 inches (15.24cm)including feet
Depth: 18 inches (45.72cm)including the Front Panel, Knobs and Cables.
Weight:25.5 pounds (11.6 kg) net, 41.9 pounds (19.0 kg) in shipping carton.

Orders ship Sunday through Friday from our offices in Dubai, UAE.

In-stock products typically ship within 48 hours and should be expected to arrive in 3-4 business days. Orders outside of the UAE should be expected to arrive in 5-7 business days.

Pre-order and backorder products will state the approximate delivery timeline beside the Add To Cart button.

If you would like to place a custom order, chat with our specialists for a guided shopping experience. Once your order has been placed, a timeline will be provided depending on your order details.

- Free delivery within the UAE
- Shipping charges will be calculated upon checkout for orders outside of the UAE (Bahrain, Oman, Kuwait, Saudi Arabia & Qatar).
- Taxes and duties are calculated according to the applicable laws of the state or country an item is shipped to and are the customer's responsibility.

For additional information on shipping and our exchange & return policy visit our help center.

Installation charges are applicable and can be paid upon delivery for our clients based in Dubai.

- Installation Charges: AED 450 Per Hour
- Speaker Cables: AED 32 Per Meter
- Trunking: AED 10 Per Meter

For clients based outside of the UAE, please contact our specialists and we will share an estimate based on your requirements.