With tracking force, anti-skate, and cartridge position preset at the factory, the McIntosh MT10 Precision Turntable delivers high-performance LP playback with minimal setup. A custom tonearm features a rigid, dural-aluminum arm-tube gimbaled in two sapphires (horizontal) and two ceramic (vertical) bearings for the least possible friction. A .5mV moving coil cartridge is included and features an ebony body with an elliptical stylus. Enjoy a new level of music with the MT10 turntable.

The McIntosh MT-10 marries classic McIntosh glass front panel cosmetics with serious
mechanics to create a unique, ready-to-play LP solution. With tracking force, anti-skate and cartridge position preset at the factory the McIntosh MT-10 delivers high-performance LP playback with minimal setup.

The turntable base is comprised of a damped sandwich of stainless steel and acrylic plate; a unique combination of dissimilar materials that provides a resonance-free foundation for the tonearm. A massive, 12 pound, 2 ½” thick acrylic platter spins on a cushion of air, elevated by a custom magnetic bearing.

A regulated power supply drives a super-quiet, brushless, Swiss DC motor. Unmatched
accuracy is derived from a new electronic speed control that references 1,595 strobe
markings per revolution of the platter. Speed adjustments of 331/3, 45, or 78 RPM are
made from the front panel and are registered on the blue, backlit MT10’s meter.

A custom tonearm features a rigid, dural-aluminum arm-tube gimbaled in two sapphire
(horizontal) and two ceramic (vertical) bearings for the least possible friction. A .5mV moving coil cartridge is included and features an ebony body with an elliptical stylus.

Ready To Play
Tracking force, anti-skate and cartridge position are all preset. The MT-10 is ready to use just moments after unpacking.

Cartridge
The MT10 tone arm features a specially dampened Dural-Aluminium arm tube. The lightweight and rigidity of the tone arm is an ideal mate for the custom,medium-weight moving coil cartridge.

Massive Platter
The platter is CNC machined from a special silicone acrylic material to a weight of twelve pounds and a thickness of two and one-half inches for near immunity to bass-robbing resonances. Magnetic Air Damped.

Bearing
The MT10 Turntable Platter rotates on a special magnetic bearing; literally suspended on a cushion of air for near friction-free performance.

CARTRIDGE SPECIFICATIONS
Cartridge Type:Moving Coil, Low Output
Output Level:0.5 mV at 5 cm/s
Load Impedance:400 to 500 Ohms recommended
Frequency Response:20Hz to 50kHz
Channel Separation:Greater than 30dB at 1Khz
Compliance:6 x 10-6 cm/dyne
Recommended Tracking Force:2.4 g
Channel Difference:Less than 0.3dB at 1kHz
Total Mass:11 g
Stylus:Elliptical Diamond
Cantilever Material:Aluminum

TONEARM SPECIFICATIONS
Bearing:Sapphire and Ceramic
Arm Tube:Dural-Aluminum
Counterweight:Eccentric
Adjustments:Vertical Tracking Angle, Antiskate, Azimuth

TURNTABLE SPECIFICATIONS
Playback Speeds:33-1/3, 45 and 78 rpm
Motor Type:DC Brushless
Speed Control:Electronic w/ braking feature
Platter:Silicon Acrylic
Platter Bearing:Magnetic Suspended Ceramic
Signal To Noise Ratio41dB - 44dB
Wow & Flutter:0.10% - 0.15%

CONNECTIVITY
Stereo Outputs Unbalanced:1

CONTROL
Power Control Input:1
Power Control Output:1
Platter Light:Yes
Speed Control Fine Adjustment:Yes

GENERAL SPECIFICATIONS
Dust Cover Included:No

WEIGHTS & DIMENSIONS
Unit Dimensions (W x H x D):
- 17-1/2" (44.45cm) x 8-13/16" (22.38cm) x 21" (53.34cm)
Note: Tone Arm Height will vary depending on the type of Cartridge installed.
Unit Weight:42 lbs (19 kg)
Shipping Weight:63 lbs (28.6 kg)

Orders ship Sunday through Friday from our offices in Dubai, UAE.

In-stock products typically ship within 48 hours and should be expected to arrive in 3-4 business days. Orders outside of the UAE should be expected to arrive in 5-7 business days.

Pre-order and backorder products will state the approximate delivery timeline beside the Add To Cart button.

If you would like to place a custom order, chat with our specialists for a guided shopping experience. Once your order has been placed, a timeline will be provided depending on your order details.

- Free delivery within the UAE
- Shipping charges will be calculated upon checkout for orders outside of the UAE (Bahrain, Oman, Kuwait, Saudi Arabia & Qatar).
- Taxes and duties are calculated according to the applicable laws of the state or country an item is shipped to and are the customer's responsibility.

For additional information on shipping and our exchange & return policy visit our help center.

Installation charges are applicable and can be paid upon delivery for our clients based in Dubai.

- Installation Charges: AED 450 Per Hour
- Speaker Cables: AED 32 Per Meter
- Trunking: AED 10 Per Meter

For clients based outside of the UAE, please contact our specialists and we will share an estimate based on your requirements.