The McIntosh MT2 Precision Turntable offers a high-fidelity gateway to vinyl, arriving ready-to-play with a pre-mounted, high-output Moving Coil (MC) phono cartridge. Its belt-drive system, powered by a Swiss-made DC motor, ensures precise 33 1/3 and 45 RPM playback.
The dynamically balanced POM platter features distinctive green illumination, while the dural-aluminum tonearm with ceramic bearings provides accurate tracking. The multi-layered chassis, blending polished stainless steel, acrylic, and aluminum, meticulously suppresses vibrations for exceptional clarity. With adjustable feet and a custom dust cover, the MT2 marries McIntosh’s iconic aesthetic with meticulous engineering, offering a quiet, stable, and sonically rewarding vinyl experience right out of the box.

- The McIntosh MT2 Precision Turntable combines the latest in turntable technology and design to deliver both superb performance and accurate playback.
- Its advanced electronic and mechanical design will give you many years of smooth, trouble-free operation.
- Virtually ready to use out of the box as tracking force, anti-skate force, cartridge overhang, and arm height are all preset from the factory for maximum performance. The remaining setup steps are simple and you’ll be enjoying your vinyl in no time.
- The DC motor is driven by an external voltage stabilized power supply and is completely decoupled from the chassis, isolating your records from any mechanical interference.
- Sturdy plinth has a resonance optimized and highly compressed wood base with black lacquer finish, while the top and middle acrylic plates help absorb unwanted vibrations.
- A subtle green glow emanates from under the platter and the outside edges of the plinth for a touch of refined ambiance.

CARTRIDGE SPECIFICATIONS
Cartridge Type: Moving Coil, High Output
Output Level: 2.5 mV at 5 cm/s
Load Impedance: 1000 Ohms recommended (Preamp MC Input)
Frequency Response: 20Hz to 50kHz
Channel Separation: 35dB at 1kHz
Compliance: 15 x 10-6 cm/dyne
Recommended Tracking Force: 2.0 g
Channel Difference: Less than 0.5dB at 1kHz
Total Mass: 6.3 g
Stylus: Elliptical Diamond
Cantilever Material: Aluminum

TONEARM SPECIFICATIONS
Bearing:Sapphire and Ceramic

Arm Tube: Dural-Aluminum
Counterweight: Eccentric
Adjustments: Vertical Tracking Angle, Antiskate, Azimuth

TURNTABLE SPECIFICATIONS
Playback Speeds: 33-1/3 and 45 rpm
Motor Type: DC Motor with Stainless Steel Brushes
Speed Control: Servo System
Platter: Dynamically balanced polyoxymethylene (POM)
Platter Bearing:
- Polished and tempered steel shaft in sintered bronze bushings
Signal To Noise Ratio: 35dB - 40dB

CONNECTIVITY
Stereo Outputs Unbalanced: 1

CONTROL
Power Control Input: 0
Power Control Output: 0
Platter Light: N/A
Speed Control Fine Adjustment: Yes

GENERAL SPECIFICATIONS
Dust Cover Included: Yes

WEIGHTS & DIMENSIONS
Unit Dimensions (W x H x D):
- 17-13/16" (45.2cm) x 5" (12.7cm) (6" (15.2cm) with dust cover) x 17" (43.2cm)
Unit Weight:29 lbs (13.2 kg)

Orders ship Sunday through Friday from our offices in Dubai, UAE.

In-stock products typically ship within 48 hours and should be expected to arrive in 3-4 business days. Orders outside of the UAE should be expected to arrive in 5-7 business days.

Pre-order and backorder products will state the approximate delivery timeline beside the Add To Cart button.

If you would like to place a custom order, chat with our specialists for a guided shopping experience. Once your order has been placed, a timeline will be provided depending on your order details.

- Free delivery within the UAE
- Shipping charges will be calculated upon checkout for orders outside of the UAE (Bahrain, Oman, Kuwait, Saudi Arabia & Qatar).
- Taxes and duties are calculated according to the applicable laws of the state or country an item is shipped to and are the customer's responsibility.

For additional information on shipping and our exchange & return policy visit our help center.

Installation charges are applicable and can be paid upon delivery for our clients based in Dubai.

- Installation Charges: AED 450 Per Hour
- Speaker Cables: AED 32 Per Meter
- Trunking: AED 10 Per Meter

For clients based outside of the UAE, please contact our specialists and we will share an estimate based on your requirements.