The Dan D’Agostino Momentum MxV Integrated Amplifier, a two-chassis design, delivers uncompromising high-end audio by combining robust power with refined preamplification. Its separate power supply, with a 2,000 VA transformer and 60,000 μF capacitance, ensures isolated, pristine power for its discrete, balanced circuitry. It outputs 250 W/ch into 8 Ω, doubling down to 1,000 W/ch into 2 Ω, effortlessly driving any speaker.

With the optional Digital Streaming Module (DSM), the MxV gains comprehensive digital capabilities. This module adds SPDIF, Optical, USB-A, Ethernet, and Wi-Fi inputs, supporting Tidal, Qobuz, MQA, and high-resolution PCM (up to 32 bit/192 kHz) and DSD (up to DSD1024). Controlled via a dedicated iOS app, the MxV Integrated offers a complete, stunningly crafted, and state-of-the-art audio solution for the discerning audiophile.

The Power of Supply
Defying its compact size, the Momentum MxV Integrated is a powerhouse amplifier. The backbone is a new ultra-quiet 2,000VA linear transformer. A unique toroidal winding technology, first employed in the Momentum M400 amplifier, delivers greater power output from a similarly sized conventional transformer keeping the Momentum MxV Integrated surprisingly small for its capability. This engine drives a nearly 60,000ⲙF capacitor bank resulting in 250/500/1,000W power output into 8/4/2Ω speaker loads. Internal circuitry filters RF noise from the AC powerline and compensates for asymmetric power waveforms and DC on the mains.

Audio Circuitry
Every major section of the integrated amplifier has been touched by technology advancements pioneered in the Relentless and Momentum series models. Starting with the preamplifier section, six individual left and right circuit boards make up the input, volume control, and output sections. The core topologies have been appropriated from the Momentum HD Momentum Preamplifier including the innovative input stage.

Digital Streaming and Phono Module
The distinct advantage of an integrated amplifier is the direct connection of the preamplifier amplifier stage to the amplifier input section. This pure path eliminates connector and cable anomalies that potentially impact electrical and sonic performance. Crucial to the new circuit are the bipolar transistors powering the front end of the amplifier. In all of the Momentum MxV amplifiers, new devices deliver ten times the current and power of previously used devices. These wider bandwidth, higher power components extend low and high frequency performance with reduced distortion in both frequency extremes. Energizing the driver stage is a new bias stability circuit providing a nearly 50% increase in operating bias. Increasing Class A operation directly correlates to better sound quality. With the new MxV circuit topology and our unique Copper Aluminum thermal engine heatsink, heat issues are not a practical concern in the Momentum MxV Integrated Amplifier. The new bias scheme ensures bias consistency, preventing excessive temperatures even under the greatest demand. Additional power transistors in the output stage reduce workload for each device. By minimizing stress on each individual device, the entire output section works more efficiently. The result is a richer, more dynamic, intimate presentation regardless of musical genre.

The final output stage features new output transistors that were originally sourced for the flagship Relentless Monoblock Amplifier. 28 high speed, high-output transistors are used in the Momentum MxV Integrated. Each transistor mounts with two stainless steel fasteners—a rarity among flat-package transistors—for maximum thermal transfer to the copper heat sinks. A capacitor/resistor network connected to the base of each transistor ensures stability even at high frequencies and with low-impedance speakers. Additionally, every output transistor is measured and only devices that match the required performance specifications are included in the production of the Momentum MxV Integrated Amplifier. As with all D'Agostino models, the Momentum MxV Integrated Amplifiers feature discrete, direct-coupled balanced circuitry, the most accurate circuit platform possible.

An optional digital module vaults the Momentum MxV Integrated into the cutting edge of today’s digital listening environment. The digital enhancement adds connectivity for legacy sources, both source and host USB functionality, and premier streaming functionality. Field upgradeable, the digital module adds SPDIF coaxial, Optical, and USB-A for legacy digital components and Ethernet and Wifi for network-based music. A dedicated iOS D’Agostino DSM app provides built-in Tidal, Qobuz, MQA decoding, plus complete unit control. PCM signals up to 24 bit/192 KHz and DSD signals up to 4xDSD (11.2 MHz).

The optional phono module adds vinyl playback capability to the Momentum MxV Integrated Amplifier. Low output moving coil cartridges are supported with over 60dB of gain and loading options from 100Ohm-47kOhm.

Each Momentum integrated amplifier is hand-built and individually tested in D'Agostino's Arizona factory by our team of technicians and craftsmen.The Momentum Integrated comes in silver, black, or custom painted finishes.

Frequency Response: 0.1 Hz to 100 kHz +0/-3 dB, 20 Hz to 20 kHz, ±0.1 dB
Signal-to-Noise Ratio: 75 dB, unweighted
Total Harmonic Distortion: 250 watts @ 8Ω 0.05% @ 1 kHz
Input Impedance: 1 MΩ
Output Impedance: 7Ω
Power: 250 watts @ 8Ω 500 watts @ 4Ω 1,000 watts @ 2Ω
Distortion: 200 watts @ 8 Ω < 0.1%, 20 Hz to 20 kHz
Inputs: 3 pr stereo balanced XLR, 1 pr stereo single-ended RCA
Outputs: 1 pr stereo balanced XLR, 1 1/4" headphone jack, 1 pr binding post
Dimensions: 18.25 x 9.5 x 17.8 in / 46.4 x 24.1 x 45.2 cm
Weight: 112 lb / 50.8 kg
Digital Inputs (w/DAC Module Installed): 1 ea USB A type, Optical, SPDIF coaxial, Ethernet RJ45, Wi-Fi
Product Class: Momentum

Orders ship Sunday through Friday from our offices in Dubai, UAE.

In-stock products typically ship within 48 hours and should be expected to arrive in 3-4 business days. Orders outside of the UAE should be expected to arrive in 5-7 business days.

Pre-order and backorder products will state the approximate delivery timeline beside the Add To Cart button.

If you would like to place a custom order, chat with our specialists for a guided shopping experience. Once your order has been placed, a timeline will be provided depending on your order details.

- Free delivery within the UAE
- Shipping charges will be calculated upon checkout for orders outside of the UAE (Bahrain, Oman, Kuwait, Saudi Arabia & Qatar).
- Taxes and duties are calculated according to the applicable laws of the state or country an item is shipped to and are the customer's responsibility.

For additional information on shipping and our exchange & return policy visit our help center.

Installation charges are applicable and can be paid upon delivery for our clients based in Dubai.

- Installation Charges: AED 450 Per Hour
- Speaker Cables: AED 32 Per Meter
- Trunking: AED 10 Per Meter

For clients based outside of the UAE, please contact our specialists and we will share an estimate based on your requirements.