Klipsch
RF-7 III Floorstanding Speaker
(1 customer review)

AED 17,415.00 (Inc. Tax)

16585.714286
(Price Per Pair)

Clear
Pay a 50% deposit per item

Designed and Made in the USA.

Featuring an all-new titanium compression driver, 90×90 compressed molded-rubber Tractrix horn, redesigned bifurcated cabinet, cast basket Cerametallic woofers, and finished in a premium, furniture-grade wood veneer – the RF-7 III floor-standing speaker champions our legendary, high-performance Klipsch sound.

Orders ship Sunday through Friday from our offices in Dubai, UAE.

In-stock products typically ship within 48 hours and should be expected to arrive in 3-4 business days. Orders outside of the UAE should be expected to arrive in 5-7 business days.

Pre-order and backorder products will state the approximate delivery timeline beside the Add To Cart button.

If you would like to place a custom order, chat with our specialists for a guided shopping experience. Once your order has been placed, a timeline will be provided depending on your order details.

- Free delivery within the UAE
- Shipping charges will be calculated upon checkout for orders outside of the UAE (Bahrain, Oman, Kuwait, Saudi Arabia & Qatar).
- Taxes and duties are calculated according to the applicable laws of the state or country an item is shipped to and are the customer's responsibility.

For additional information on shipping and our exchange & return policy visit our help center.

Installation charges are applicable and can be paid upon delivery for our clients based in Dubai.

- Installation Charges: AED 350 Per Hour
- Speaker Cables: AED 20 Per Meter
- Trunking: AED 10 Per Meter

For clients based outside of the UAE, please contact our specialists and we will share an estimate based on your requirements.


Proudly made in the USA


So what makes the RF-7 III sound so good? Well, part of their sonic excellence is attributed to their impeccable build quality. Each speaker is designed and built-in Hope, Arkansas. The back of each RF-7 III even features a plaque that's hand-signed by the speaker's craftsman.

NEW 1 3/4 TITANIUM DIAPHRAGM COMPRESSION DRIVER
The compression driver features a new phase plug design to improve
phase coherency at the throat of the horn, resulting in improved
sound pressure linearity at high frequencies.

90° x 90° TRACTRIX® HORN
The redesigned Tractrix Horn utilizes a circular horn throat paired to
a square horn mouth to further improve high-frequency response and
extension while enhancing imaging and dynamics. The compressed
molded rubber construction adds high-frequency damping to reduce
harshness and improve detail. This creates the cleanest, most natural
sound possible.

SPUN COPPER CERAMETALLIC WOOFERS™
Cerametallic woofers represent the pinnacle of Klipsch driver design,
maintaining exceptional rigidity, and lightweight construction, for
minimal cone breakup and distortion. When paired with the Tractrix
horn-loaded compression driver, it provides speaker efficiency
highest in its class.

NEW TRACTRIX® PORT
Utilizing Tractrix geometry, the new RF-7 III ports allow for the
most efficient air transfer from the cabinet — for the cleanest, most
powerful low-frequency response on the market.

CAST FRAME WOOFER DESIGN
Each 10” woofer feature a heavy-duty cast aluminum frame for
resonant-free operation. In addition, each woofer incorporates a dual
shorting-ring magnet structure design to eliminate modulation of the
magnetic flux resulting in improved linearity of cone movement.

FURNITURE GRADE WOOD VENEERS
RF-7 III enclosures all utilize furniture grade wood veneers and are
available in Black Ash, Cherry & Walnut.
- All-New 1 3/4" Titanium Compression Driver
- 90x90 Compressed Molded-Rubber Tractrix Horn
- Redesigned Bifurcated Cabinet
- Dual Tractrix Ports
- Dual 10" Cast Basket Cerametallic Woofers
- Premium Furniture-Grade Wood Veneers
- Assembled in Hope, AR
- Frequency Response: 32–25kHz +/– 3dB
- Sensitivty: 100dB @ 2.83V / 1M
- Power handling (cont/peak): 250W / 1000W peak
- Nominal Impedance: 8 ohms Compatible
- Crossover frequency: 1,300 Hz
- High Frequency Driver:1.75” (4.45cm) titanium diaphragm
compression driver
- High Frequency Horn: 8.5” square 90? x 90? Tractrix® Horn
Driver mated to a K-703-M horn
- low frequency Driver: Two 10” (25.4cm) Cerametallic cone
woofers.
- Enclosure Type:Dual chambered, bass-reflex — via dual rear-
firing Tractrix ports
- Inputs: Dual binding posts / bi-wire / bi-amp
- Height: 49” (124.5cm) including plinth
- Width: 3.875” (35.2cm) including plinth
- Depth: 17.875” (45.4cm) including plinth
- Weight: 97 Ibs (44.1kg)

Proudly made in the USA


So what makes the RF-7 III sound so good? Well, part of their sonic excellence is attributed to their impeccable build quality. Each speaker is designed and built-in Hope, Arkansas. The back of each RF-7 III even features a plaque that's hand-signed by the speaker's craftsman.

NEW 1 3/4 TITANIUM DIAPHRAGM COMPRESSION DRIVER
The compression driver features a new phase plug design to improve
phase coherency at the throat of the horn, resulting in improved
sound pressure linearity at high frequencies.

90° x 90° TRACTRIX® HORN
The redesigned Tractrix Horn utilizes a circular horn throat paired to
a square horn mouth to further improve high-frequency response and
extension while enhancing imaging and dynamics. The compressed
molded rubber construction adds high-frequency damping to reduce
harshness and improve detail. This creates the cleanest, most natural
sound possible.

SPUN COPPER CERAMETALLIC WOOFERS™
Cerametallic woofers represent the pinnacle of Klipsch driver design,
maintaining exceptional rigidity, and lightweight construction, for
minimal cone breakup and distortion. When paired with the Tractrix
horn-loaded compression driver, it provides speaker efficiency
highest in its class.

NEW TRACTRIX® PORT
Utilizing Tractrix geometry, the new RF-7 III ports allow for the
most efficient air transfer from the cabinet — for the cleanest, most
powerful low-frequency response on the market.

CAST FRAME WOOFER DESIGN
Each 10” woofer feature a heavy-duty cast aluminum frame for
resonant-free operation. In addition, each woofer incorporates a dual
shorting-ring magnet structure design to eliminate modulation of the
magnetic flux resulting in improved linearity of cone movement.

FURNITURE GRADE WOOD VENEERS
RF-7 III enclosures all utilize furniture grade wood veneers and are
available in Black Ash, Cherry & Walnut.
Read more

- All-New 1 3/4" Titanium Compression Driver
- 90x90 Compressed Molded-Rubber Tractrix Horn
- Redesigned Bifurcated Cabinet
- Dual Tractrix Ports
- Dual 10" Cast Basket Cerametallic Woofers
- Premium Furniture-Grade Wood Veneers
- Assembled in Hope, AR

- Frequency Response: 32–25kHz +/– 3dB
- Sensitivty: 100dB @ 2.83V / 1M
- Power handling (cont/peak): 250W / 1000W peak
- Nominal Impedance: 8 ohms Compatible
- Crossover frequency: 1,300 Hz
- High Frequency Driver:1.75” (4.45cm) titanium diaphragm
compression driver
- High Frequency Horn: 8.5” square 90? x 90? Tractrix® Horn
Driver mated to a K-703-M horn
- low frequency Driver: Two 10” (25.4cm) Cerametallic cone
woofers.
- Enclosure Type:Dual chambered, bass-reflex — via dual rear-
firing Tractrix ports
- Inputs: Dual binding posts / bi-wire / bi-amp
- Height: 49” (124.5cm) including plinth
- Width: 3.875” (35.2cm) including plinth
- Depth: 17.875” (45.4cm) including plinth
- Weight: 97 Ibs (44.1kg)


Overall Score

5.00

1 Reviews
0 Reviews
0 Reviews
0 Reviews
0 Reviews

1 review for RF-7 III Floorstanding Speaker

  1. Awesome speakers

    [email protected] (verified owner)

    Absolute beasts in all the best ways, They’re massive speakers.

    Rating: 5 / 5

No Q&A added.

    YOU MIGHT ALSO LIKE

    X