The McIntosh XR100 is a sophisticated 4-way ported floor standing loudspeaker, designed for exceptional full-range audio. Despite its slim profile, it delivers robust performance, handling 75 to 600 Watts of power.

Each speaker features an impressive 15-driver array: four 6-inch LD/HP® woofers for deep bass, ten 2-inch inverted titanium dome midranges for detailed mids, and a 3/4-inch titanium dome tweeter for extended highs (30Hz-45kHz). Precision crossovers ensure seamless integration. With an 8 Ohm impedance and 87dB sensitivity, it offers versatile amplifier compatibility. The XR100 boasts a luxurious high-gloss finish (Black, Red Walnut, Pear Maple), a magnetic grille, and dual sets of Solid Cinch™ binding posts for bi-wiring. Its slim design, combined with a wide, detailed soundstage, makes it a premium choice for audiophiles.

XR100 Features:

- Combining 600 Watts of power handling capability with superior musicality, the XR100 will fill even large rooms with full-bodied sound.
- Available in Gloss Black, Red Walnut and Pear Maple, the XR100’s high-gloss finishes and fine cabinetry will be a welcome addition to even the most elegant homes.
- The XR100 utilizes 11 upper-frequency drivers. Their unique layout and crossover design combine high power handling with precise sound staging.
- With four McIntosh patented LD/HP® woofers, these speakers reproduce an incredibly deep bass experience from a slim cabinet design.
- The McIntosh front panel emblem can be illuminated using the Power Control connection on complementary McIntosh components.
- Two sets of unique patented McIntosh speaker binding posts are provided for bi-wiring setups.
- Solid alloy, machined midrange tweeter baffle enhances imaging and appearance.

MA352 Features:

- The MA352 Integrated Amplifier is a hybrid design that combines the finest of vacuum tube and solid state audio design principles.
- The result is an eye-catching amplifier that enjoys the best of these two opposing audio philosophies all while reproducing music at the highest quality level.
- Features a vacuum tube preamplifier section that is powered by a pair of 12AX7A and a pair of 12AT7 vacuum tubes.
- Output stage is a direct coupled solid state amplifier that outputs 200 Watts per channel into 8 Ohm speakers or 320 Watts per channel into 4 Ohm speakers.
- Full of numerous McIntosh technologies including Power Guard®, Sentry Monitor™, McIntosh Monogrammed Heatsinks™, 5-Band analog tone control, Home Theater Pass Through, High Drive headphone amplifier with Headphone Crossfeed Director (HXD®), and Power Control.
- Sits atop a beautiful polished stainless steel chassis with a classic McIntosh-styled die cast aluminum name badge attached to each side.

MT5 Features:

- MT5 is a complete turntable package that is more than the sum of its parts. Engineered to exacting McIntosh standards, each piece contributes to its superb
performance.
- MT5 is factory adjusted for perfect playback. Tracking force, anti-skate force, cartridge overhang and arm height are all preset for maximum performance.
- While the construction of the MT5 is meticulous, the setup is simple. In a few easy steps, you’ll be ready to enjoy your favorite vinyl recordings.
- While maintaining complementary McIntosh styling, the MT5 takes full advantage of the chassis materials used to suppress noise, resonance and coloration so the only sound produced is that which is on your records.
- Includes a clear, form-fitting dust cover to protect moving parts and your records.

ELECTRONIC SPECIFICATIONS
Impedance Nominal:8 Ohms
Sound Pressure Level, 2.8V/1m:87dB
Power Rating:75 to 600 Watts
Crossover:300Hz, 2kHz, 8kHz
Frequency Response:30Hz to 45kHz

DRIVER SPECIFICATIONS
Number of Woofers:4
Number of Midranges:10
Number of Tweeters:1
Woofer Size:6"
Midrange Size:2"
Tweeter Size:3/4"
Woofer Type:Cast Frame, LD/HP®, Poly Cone
Midrange Type:
- 8 Inverted Titanium Dome Midranges covering 300Hz to 2kHz,
- 2 Inverted Titanium Dome Midrange-Tweeters covering 2kHz to 8kHz.
Tweeter Type:Titanium Dome

GENERAL SPECIFICATIONS:
System Type:Ported 4-Way Floor Standing
Grille:Black knit cloth, magnetically attached
Available Finishes:Red Walnut, Black

WEIGHTS & DIMENSIONS:Unit Dimensions (W x H x D)
- 8" (20.3cm) x 51" (129.5cm) x 18-1/2" (46.9cm) (including cables and connectors).
Unit Weight:68.5 lbs (31.1 kg)
Shipping Weight:83 lbs (37.6 kg)

MA352 Specifications:

ELECTRONIC SPECIFICATIONS
Power Output per Channel:
- 200 Watts into 8 Ohms
- 320 Watts into 4 Ohms
Number of Channels:2
Speaker Impedance:4 or 8 Ohms
Rated Power Band:20Hz to 20kHz
Total Harmonic Distortion:0.03%
Dynamic Headroom:1.5dB
Frequency Response +0,-0.5dB:20Hz to 20kHz
Frequency Response, +0, -3dB:10Hz to 100kHz
Sensitivity Phono (Moving Coil):N/A
Sensitivity Phono (Moving Magnet):2.5mV
Sensitivity High Level (Balanced / Unbalanced):0.5V/0.25V
Sensitivity (Power Amp input):N/A
Signal To Noise Ratio (Moving Coil):N/A
Signal To Noise Ratio (Moving Magnet):82dB
Signal To Noise Ratio (High Level):93dB
Signal To Noise Ratio (Power Amp input):N/A
Input Impedance (Balanced / Unbalanced):20K/20K
Damping Factor:
- 8 Ohms: >200
- 4 Ohms: >100
Maximum Output (Balanced / Unbalanced):8V Unbalanced

CONNECTIVITY
Balanced Input:2
Unbalanced Input:3
Phono Input Moving Coil:0
Phono Input Moving Magnet:1 (adjustable loading)
Upgradeable Digital Audio Module:No
Digital Coaxial Input:0
Digital Optical Input:0
Digital MCT (DIN) Input:0
Digital USB Input:0
HDMI (ARC) Input:0
Balanced Variable Output:0
Unbalanced Fixed Output:0
Unbalanced Variable Output1
Headphone Output:
- 1/4" High Drive with Headphone Crossfeed Director (HXD®)
Subwoofer Output:2
AM/FM Tuner option:No
Home Theater PassThru:Yes
Unbalanced Analog Connector Type:Standard
Speaker Binding Post Type:Standard
Service Port:1

DIGITAL AUDIO SPECIFICATIONS
Digital-to-Analog Converter (DAC) Type:N/A
Digital Coaxial Input Sample Rate:N/A
Digital Optical Input Sample Rate:N/A
Digital MCT (DIN) Input Sample Rate:N/A
Digital USB Input Sample Rate:N/A

CONTROL
Tone Controls:5-Band
Tone Bypass and Input Assign:Yes
RS232 Control Input:Yes
Power Control Output:1
Rear Panel Data Port:2
Rear Panel IR Sensor Input:Yes
Input Level Match:Yes

GENERAL SPECIFICATIONS
Vacuum Tube or Solid State:
- Preamplifier: Vacuum Tube
- Power Amplifier: Solid State
Output Type:Direct Coupled
Output Meters:Yes
Dual Layer Chassis:Yes
Chassis Finish:Polished stainless steel
McIntosh Monogrammed Heatsinks™:Yes
Power Requirement:120V 50/60Hz, 6.0A
Standby Power Requirement:<0.5 Watts

WEIGHTS & DIMENSIONS
Unit Dimensions (W x H x D):
- 17-1/2" (44.5cm) x 9-7/8" (25.1cm) x 17-7/16" (44.3cm)
Unit Weight:66 lbs (29.9 kg)
Shipping Weight:75 lbs (34.0 kg)

 

MT5 Specifications:

CARTRIDGE SPECIFICATIONS
Cartridge Type:Moving Coil, High Output
Output Level:2.5 mV at 5 cm/s
Load Impedance:1000 Ohms recommended (Preamp MC Input)
Frequency Response:20Hz to 50kHz
Channel Separation:35dB at 1kHz
Compliance:15 x 10-6 cm/dyne
Recommended Tracking Force:2.0 g
Channel Difference:Less than 0.5dB at 1kHz
Total Mass:6.3 g
Stylus:Elliptical Diamond
Cantilever Material:Aluminum

TONEARM SPECIFICATIONS
Bearing:Magnetic Sapphire and Ceramic
Arm Tube:Dural-Aluminum
Counterweight:Eccentric
Adjustments:Vertical Tracking Angle, Antiskate, Azimuth

TURNTABLE SPECIFICATIONS:
Playback Speeds33-1/3, 45 and 78 rpm
Motor Type:DC Motor with Stainless Steel Brushes
Speed Control:Servo System
Platter:Silicon Acrylic
Platter Bearing:Magnetic Suspended Ceramic
Signal To Noise Ratio:36dB - 41dB
Wow & Flutter:0.15% - 0.20%

CONNECTIVITY
Stereo Outputs Unbalanced:1

CONTROL
Power Control Input:1
Power Control Output:1
Platter Light:Yes
Speed Control Fine Adjustment:Yes

GENERAL SPECIFICATIONS
Dust Cover Included:Yes

WEIGHTS & DIMENSIONS
Unit Dimensions (W x H x D):
- 17-1/2" (44.45cm) x 7" (17.8cm) (7-1/2" (19.0cm) with dust cover) x 19" (48.26cm)
Note: Tone Arm Height will vary depending on the type of Cartridge installed.
Unit Weight:31.5 lbs (14.3 kg)
Shipping Weight:38 lbs (17.2 kg)

Orders ship Sunday through Friday from our offices in Dubai, UAE.

In-stock products typically ship within 48 hours and should be expected to arrive in 3-4 business days. Orders outside of the UAE should be expected to arrive in 5-7 business days.

Pre-order and backorder products will state the approximate delivery timeline beside the Add To Cart button.

If you would like to place a custom order, chat with our specialists for a guided shopping experience. Once your order has been placed, a timeline will be provided depending on your order details.

- Free delivery within the UAE
- Shipping charges will be calculated upon checkout for orders outside of the UAE (Bahrain, Oman, Kuwait, Saudi Arabia & Qatar).
- Taxes and duties are calculated according to the applicable laws of the state or country an item is shipped to and are the customer's responsibility.

For additional information on shipping and our exchange & return policy visit our help center.

Installation charges are applicable and can be paid upon delivery for our clients based in Dubai.

- Installation Charges: AED 450 Per Hour
- Speaker Cables: AED 32 Per Meter
- Trunking: AED 10 Per Meter

For clients based outside of the UAE, please contact our specialists and we will share an estimate based on your requirements.