MC275

AED 22,080.00 (Exc. Tax)

MC275 2-Channel Vacuum Tube Amplifier

– 75 Watts x 2 channel
– Vacuum Tube Design

Only 1 left in stock

*50% Deposit payment for backordered products
Shipping within the GCC: Bahrain | Oman | Kuwait | Saudi Arabia

Taxes and duties are calculated according to the applicable laws of the state or country an item is shipped to and are the customers responsibility.
SKU: MC275-62405 Categories: , , Tags: , Brand: McIntosh

Description

BROCHURE

DESCRIPTION

The MC275 2-Channel Vacuum Tube Amplifier tube power amplifier has all the features to meet the needs of today’s music enthusiast while preserving the qualities that have made the MC275 the most revered McIntosh tube amplifier.

This sixth generation MC275 has many subtle enhancements from the previous release that greatly improve performance. Combined with the widest bandwidth McIntosh output transformer design, the MC275 features tauter bass control and thermally quiet circuit design. The result is pure music.

“Good audio engineering is timeless.” – Stereophile

McIntosh patented and gold-plated Solid Cinch™ speaker binding posts assure the best connection to all speaker cables, while high quality balanced and unbalanced input connectors enhance signal transfer from the connected preamplifier.

The seven small tubes are LED illuminated to indicate the amplifier’s functional status: upon power-up, they sequentially glow amber for a few seconds and then all turn green to signify system readiness. In the rare case of an output tube failure, the small tubes in front of it will turn red to notify you of the problem. Power Control is used to remotely control tube illumination from a McIntosh preamplifier.

ELECTRONIC SPECIFICATIONS

Power Output per Channel 100 Watts into 8 Ohms | 160 Watts into 4 Ohms
Number of Channels 2
Speaker Impedance 4 or 8 Ohms
Rated Power Band 20Hz to 20kHz
Total Harmonic Distortion 0.03%
Dynamic Headroom 1.8dB
Frequency Response +0,-0.5dB 20Hz to 20kHz
Frequency Response, +0, -3dB 10Hz to 100kHz
Sensitivity Phono (Moving Coil) N/A
Sensitivity Phono (Moving Magnet) 3.0mV
Sensitivity High Level (Balanced/Unbalanced) 0.6V/0.3V
Sensitivity (Power Amp input) N/A
Signal To Noise Ratio (Moving Coil) N/A
Signal To Noise Ratio (Moving Magnet) 80dB
Signal To Noise Ratio (High Level) 97dB
Signal To Noise Ratio (Power Amp input) N/A
Input Impedance (Balanced / Unbalanced) 20K/20K
Damping Factor 8 Ohms:>200 | 4 Ohms:>100
Maximum Output (Balanced / Unbalanced) 8V Unbalanced

CONNECTIVITY

Balanced Input 1
Unbalanced Input 2
Phono Input Moving Coil 0
Phono Input Moving Magnet 1 (fixed loading)
Upgradeable Digital Audio Module No
Digital Coaxial Input 0
Digital Optical Input 0
Digital MCT (DIN) Input 0
Digital USB Input 0
Balanced Variable Output 0
Unbalanced Fixed Output 0
Unbalanced Variable Output 0
Headphone Output 1/4″ High Drive
Subwoofer Output 1 (mono)
AM/FM Tuner option No
Home Theater PassThru No
Unbalanced Analog Connector Type Standard
Speaker Binding Post Type Standard
Service Port 0

DIGITAL AUDIO SPECIFICATIONS

Digital-to-Analog Converter (DAC) Type N/A
Digital Coaxial Input Sample Rate N/A
Digital Optical Input Sample Rate N/A
Digital MCT (DIN) Input Sample Rate N/A
Digital USB Input Sample Rate N/A

CONTROL

Tone Controls Bass and Treble
Tone Bypass and Input Assign Yes
RS232 Control Input No
Power Control Output 1
Rear Panel Data Port 1
Rear Panel IR Sensor Input No
Input Level Match Yes

Additional information

Weight 34.10 kg
Dimensions 35.6 × 55.9 × 42.6 cm

GENERAL SPECIFICATIONS

GENERAL SPECIFICATIONS

Circuit Configuration
Unity Coupled
Circuit Design
Vacuum Tube
Mono Bridge
Yes
Mono Parallel
Yes, 150W @ 2, 4 or 8 Ohms
Output Type
Unity Coupled Output Transformer
Meters
No
Meter Light Switch
Small signal tubes LEDs controlled by McIntosh preamp
Balanced Input
Yes
Front Panel
N/A
Illumination
Small Signal Tubes, LED
Chassis Style
Polished Stainless Steel

WEIGHTS & DIMENSIONS

Dimensions (W x H x D) 12″ (30.5cm) x 7-5/8″ (19.4cm) x 18″ (45.7cm)
Weight 28 lbs (12.7 kg)
Shipping Weight 37 lbs (16.8 kg)

GENERAL SPECIFICATIONS

Circuit Configuration
Unity Coupled
Circuit Design
Vacuum Tube
Mono Bridge
Yes
Mono Parallel
Yes, 150W @ 2, 4 or 8 Ohms
Output Type
Unity Coupled Output Transformer
Meters
No
Meter Light Switch
Small signal tubes LEDs controlled by McIntosh preamp
Balanced Input
Yes
Front Panel
N/A
Illumination
Small Signal Tubes, LED
Chassis Style
Polished Stainless Steel

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Enquiry