AudioQuest
Tower RCA-RCA Cable

AED 193AED 271 (Inc. Tax)

183.809524-258.095238
(Price Per Unit)
Free delivery on orders above AED 500 in UAE.

4 interest-free payments

965-1355
965-1355
Clear

Need Assistance?

The new entry point in the series, Tower, employs solid Long-Grain Copper (LGC) conductors, and many features used throughout the Bridges & Falls lineup, including Asymmetrical Double-Balanced Geometry, Foamed-Polyethylene insulation, Metal-Layer Noise-Dissipation System (NDS), and Cold-Welded Gold-Plated RCA plugs. Compared with the next step up the line, Evergreen, Tower uses slightly smaller conductors for cost-effective performance.

Read More

Overview

The new entry point in the series, Tower, employs solid Long-Grain Copper (LGC) conductors, and many features used throughout the Bridges & Falls lineup, including Asymmetrical Double-Balanced Geometry, Foamed-Polyethylene insulation, Metal-Layer Noise-Dissipation System (NDS), and Cold-Welded Gold-Plated RCA plugs. Compared with the next step up the line, Evergreen, Tower uses slightly smaller conductors for cost-effective performance.

Solid Long-Grain Copper Conductors (LGC) :
Strand interaction is the single greatest cause of distortion in a cable. Semi-Solid Concentric Packed Conductors avoid many strand-interaction distortion mechanisms. Solid-core conductors offer a complete and compelling solution to this problem.

Conductor metal quality is critical for the best cable performance. The conductor surface is the only area of the conductor with 100% current density at all frequencies. The smoothness of the conductor surface is imperative because the surface is a guide rail for the entire energy envelope. The best copper and silver conductor metals have fewer grain boundaries and low oxygen content for low distortion and high performance.

Solid conductors eliminate strand-interaction distortion. Tower’s solid Long-Grain Copper allows a smoother and clearer sound than cables using regular OFHC (Oxygen-Free High-Conductivity) copper. OFHC is a general metal industry specification regarding “loss” without any concern for distortion. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance.

Foamed-Polyethylene Insulation :
Insulation is necessary to keep the positive and negative conductors separate and to give stability to cable geometry. Insulation is also a “dielectric” because it is inside the conductor’s magnetic field. Dielectrics absorb energy, which after a delay is then released in the signal, causing smearing and distortion. Better insulation reduces distortion by absorbing less energy.

Tower uses air-filled Foamed-Polyethylene Insulation on both conductors because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus effect common to other materials.

Metal-Layer Noise-Dissipation System (NDS) :
100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation System. Noise-Dissipation System prevents a significant amount of RFI from reaching the equipment’s ground plane.

AudioQuest’s Noise-Dissipation System (NDS) offers a compelling solution to this challenge by using metal-only or alternating layers of metal and carbon-loaded synthetics to effectively “shield the shield,” absorbing and reflecting the Radio Frequency (RF) energy before it reaches the layer attached to the ground.

The Tower ultilises the Metal-Layer Noise-Dissipation System (NDS) to prevent most RFI from reaching the equipment’s ground plane.

Double-Balanced Asymmetrical Geometry :
Geometry is the physical relationship of the conductors to one another within a cable and determines a cable’s most basic electrical values (capacitance and inductance). Different cable applications have different/specialized geometry requirements, and so these applications do not merely follow a ‘one size fits all’ approach. Better geometry leads to lower levels of distortion.

Purpose designed for single-ended applications, Double-Balanced Asymmetrical Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.

Directionality
AudioQuest’s understanding of conductor directionality and its effect on audio performance has steadily evolved, growing stronger and more complete. All audio cables are directional. The correct direction is determined by the arrows on the plugs or cable parts.

To provide the best possible performance for each application, AudioQuest designs each of its connectors from the ground up. These components are crucial to the overall performance of the cable. Painstaking care is taken to evaluate the highest quality materials and design for every application.

AudioQuest pays special attention to the plating it uses over its connectors’ carefully crafted base metals. Wherever possible, gold connectors are plated directly over the copper, with no destructive intermediate layer of nickel or alloy, while all silver-plated connectors are Direct-Silver plated.

AudioQuest has incorporated Cold-Weld connection technology into most of their interconnects and all prepared speaker cables..

Joining conductors to plugs requires every bit as much care and precision as any other aspect of cable manufacture. AudioQuest’s Cold-Weld System uses several tons of pressure to make a near-perfect connection that ensures that the structural integrity of the conductor and plug is kept completely intact, all without the damaging effect of heat. Cold-Welding avoids the introduction of heat and extra materials like solder, which change the character of the wire at the point of termination.

Solid Long-Grain Copper Conductors (LGC) :
Strand interaction is the single greatest cause of distortion in a cable. Semi-Solid Concentric Packed Conductors avoid many strand-interaction distortion mechanisms. Solid-core conductors offer a complete and compelling solution to this problem.

Conductor metal quality is critical for the best cable performance. The conductor surface is the only area of the conductor with 100% current density at all frequencies. The smoothness of the conductor surface is imperative because the surface is a guide rail for the entire energy envelope. The best copper and silver conductor metals have fewer grain boundaries and low oxygen content for low distortion and high performance.

Solid conductors eliminate strand-interaction distortion. Tower's solid Long-Grain Copper allows a smoother and clearer sound than cables using regular OFHC (Oxygen-Free High-Conductivity) copper. OFHC is a general metal industry specification regarding “loss” without any concern for distortion. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance.

Foamed-Polyethylene Insulation :
Insulation is necessary to keep the positive and negative conductors separate and to give stability to cable geometry. Insulation is also a "dielectric" because it is inside the conductor's magnetic field. Dielectrics absorb energy, which after a delay is then released in the signal, causing smearing and distortion. Better insulation reduces distortion by absorbing less energy.

Tower uses air-filled Foamed-Polyethylene Insulation on both conductors because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile. Thanks to all the air in Foamed-PE, it causes much less of the out-of-focus effect common to other materials.

Metal-Layer Noise-Dissipation System (NDS) :
100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation System. Noise-Dissipation System prevents a significant amount of RFI from reaching the equipment’s ground plane.

AudioQuest’s Noise-Dissipation System (NDS) offers a compelling solution to this challenge by using metal-only or alternating layers of metal and carbon-loaded synthetics to effectively “shield the shield,” absorbing and reflecting the Radio Frequency (RF) energy before it reaches the layer attached to the ground.

The Tower ultilises the Metal-Layer Noise-Dissipation System (NDS) to prevent most RFI from reaching the equipment’s ground plane.

Double-Balanced Asymmetrical Geometry :
Geometry is the physical relationship of the conductors to one another within a cable and determines a cable’s most basic electrical values (capacitance and inductance). Different cable applications have different/specialized geometry requirements, and so these applications do not merely follow a ‘one size fits all’ approach. Better geometry leads to lower levels of distortion.

Purpose designed for single-ended applications, Double-Balanced Asymmetrical Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.

Directionality
AudioQuest’s understanding of conductor directionality and its effect on audio performance has steadily evolved, growing stronger and more complete. All audio cables are directional. The correct direction is determined by the arrows on the plugs or cable parts.

To provide the best possible performance for each application, AudioQuest designs each of its connectors from the ground up. These components are crucial to the overall performance of the cable. Painstaking care is taken to evaluate the highest quality materials and design for every application.

AudioQuest pays special attention to the plating it uses over its connectors’ carefully crafted base metals. Wherever possible, gold connectors are plated directly over the copper, with no destructive intermediate layer of nickel or alloy, while all silver-plated connectors are Direct-Silver plated.

AudioQuest has incorporated Cold-Weld connection technology into most of their interconnects and all prepared speaker cables..

Joining conductors to plugs requires every bit as much care and precision as any other aspect of cable manufacture. AudioQuest's Cold-Weld System uses several tons of pressure to make a near-perfect connection that ensures that the structural integrity of the conductor and plug is kept completely intact, all without the damaging effect of heat. Cold-Welding avoids the introduction of heat and extra materials like solder, which change the character of the wire at the point of termination.
Geometry: Asymmetrical Double-Balanced (lower impedance on ground, same quality + & - conductors)
Metal: Solid Long-Grain Copper (LGC) Conductors
Dielectric: Foamed-Polyethylene Insulation
Noise-Dissipation System (NDS): Metal-Layer Noise-Dissipation System
RCA Plugs: Cold-Welded, Gold-Plated
Jacket Colour: Black/white stripe PVC

Orders ship Sunday through Friday from our offices in Dubai, UAE.

In-stock products typically ship within 48 hours and should be expected to arrive in 3-4 business days. Orders outside of the UAE should be expected to arrive in 5-7 business days.

Pre-order and backorder products will state the approximate delivery timeline beside the Add To Cart button.

If you would like to place a custom order, chat with our specialists for a guided shopping experience. Once your order has been placed, a timeline will be provided depending on your order details.

- Free delivery within the UAE
- Shipping charges will be calculated upon checkout for orders outside of the UAE (Bahrain, Oman, Kuwait, Saudi Arabia & Qatar).
- Taxes and duties are calculated according to the applicable laws of the state or country an item is shipped to and are the customer's responsibility.

For additional information on shipping and our exchange & return policy visit our help center.

Installation charges are applicable and can be paid upon delivery for our clients based in Dubai.

- Installation Charges: AED 450 Per Hour
- Speaker Cables: AED 32 Per Meter
- Trunking: AED 10 Per Meter

For clients based outside of the UAE, please contact our specialists and we will share an estimate based on your requirements.

A

Solid Long-Grain Copper (LGC) allows a smoother and clearer sound than cables using regular OFHC (Oxygen-Free High-Conductivity) copper. Solid conductors prevent strand interaction, a major source of distortion. The surface quality is critical because a conductor can be considered as a rail-guide for both the electric fields within a conductor, and for the magnetic fields outside the conductor. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance.

March 20, 2023
Helpful?
A

It is easy to accomplish 100% shield coverage. Preventing captured radio-frequency interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation. Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. Noise-Dissipation "shields the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.

March 20, 2023
Helpful?
A

Purpose designed for single-ended applications, Asymmetrical Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.

March 20, 2023
Helpful?

The Bulletin